include("shared.lua") -------------------------------------------------------------------------------- ENT.ClientProps = {} ENT.ButtonMap = {} ----- -- ALS Panel ----- ENT.ButtonMap["OldARS"] = { pos = Vector(445.38,-57.98,18.49), ang = Angle(0,-90-37.9,90), width = 60, height = 140, scale = 0.0625, buttons = { {ID = "L80", x=10,75, y=13,57, w=25,h=12, tooltip="ALS80"}, {ID = "L70", x=10,75, y=30,57, w=25,h=12, tooltip="ALS70"}, {ID = "L60", x=10,75, y=46,57, w=25,h=12, tooltip="ALS60"}, {ID = "L40", x=10,75, y=61,57, w=25,h=12, tooltip="ALS40"}, {ID = "L0", x=10,75, y=76,7, w=25,h=12, tooltip="ALS0"}, {ID = "LOCh", x=10,75, y=91,57, w=25,h=12, tooltip="OCH"}, } } -- Main panel ENT.ButtonMap["Main"] = { pos = Vector(439.7+12.15,-31.99,0.05), ang = Angle(0,-90,90-27), width = 315, height = 240, scale = 0.0588, buttons = { {ID = "DIPonSet", x=39 + 51*0-1, y=94, radius=20, tooltip="КУ4:Включение ДИП и освещения\nTurn DIP and interior lights on"}, {ID = "DIPoffSet", x=35 + 51*1.03-1, y=94, radius=20, tooltip="КУ5:Отключение ДИП и освещения\nTurn DIP and interior lights off"}, {ID = "VozvratRPSet", x=35 + 51*2-1, y=94, radius=20, tooltip="КУ9:Возврат РП\nReset overload relay"}, {ID = "KSNSet", x=35 + 51*2.98-1, y=94, radius=20, tooltip="КУ8:Принудительное срабатывание РП на неисправном вагоне (сигнализация неисправности)\nKSN: Failure indication button"}, {ID = "KVTSet", x=35 + 51*3.92-1, y=94, radius=20, tooltip="КБ: Кнопка Бдительности\nKB: Attention button"}, {ID = "KDPSet", x=35 + 51*4.85-1, y=94, radius=20, tooltip="КДП:Правые двери\nKDP: Right doors open"}, ----Down Panel {ID = "KU1Toggle", x=17,y=128,w=45,h=90, tooltip="КУ1:Включение мотор-компрессора\nTurn motor-compressor on"}, {ID = "KRPSet", x=135,y=128,w=45,h=90, tooltip="КРР: Резервное реверсирование"}, {ID = "VUD1Toggle", x=253,y=128,w=45,h=90, tooltip="КУ2: Закрытие дверей\nVUD: Door control toggle (close doors)"}, {ID = "ALSToggle", x=217,y=220,radius=20, tooltip="АЛС: Автоматическая локомотивная сигнализация\nAdditional lighning"}, {ID = "L_3Toggle", x=94, y=220, radius=20, tooltip="Освещение приборов\nPanel lighting"}, ----Lamps {ID = "GreenRPLight", x=181, y=29.07, radius=20, tooltip="Зеленая РП: Зелёная лампа реле перегрузки (Сигнализация перегрузки)\nRP: Green overload relay light (overload relay open on current train)"}, {ID = "RedRPLight", x=226.8, y=29.07, radius=20, tooltip="Красная РП: Красная лампа реле перегрузки\nRP: Red overload relay light (power circuits failed to assemble)"}, {ID = "RedRP2Light", x=138, y=29.07, radius=20, tooltip="Красная лампа РК (Вращение Реостатного контроллера)\nRK: Rheostat controller motion light"}, {ID = "LVD", x=47, y=29.07, radius=20, tooltip="ЛВД: Лампа включения двигателей\nLVD: Engines engaged"}, {ID = "LST", x=90, y=29.07, radius=20, tooltip="ЛСТ: Лампа сигнализации торможения\nLST: Brakes engaged"}, {ID = "BlueLight", x=270.6, y=29.1, radius=20, tooltip="Синяя лампа СД: Сигнализация дверей поезда\nBlue door state light (doors are closed)"}, --{ID = "RezMKSet", x=66, y=80, radius=20, tooltip="Резервное включение мотор-компрессора\nEmergency motor-compressor startup"}, --{ID = "VAHToggle", x=187, y=19, radius=20, tooltip="ВАХ: Включение аварийного хода (неисправность реле педали безопасности)\nVAH: Emergency driving mode (failure of RPB relay)"}, --{ID = "VADToggle", x=226, y=19, radius=20, tooltip="ВАД: Включение аварийного закрытия дверей (неисправность реле контроля дверей)\nVAD: Emergency door close override (failure of KD relay)"}, --{ID = "ARSToggle", x=187+77, y=19, radius=20, tooltip="АРС: Включение системы автоматического регулирования скорости\nARS: Automatic speed regulation"}, --{ID = "ALSToggle", x=226+77, y=19, radius=20, tooltip="АЛС: Включение системы автоматической локомотивной сигнализации\nALS: Automatic locomotive signalling"}, --{ID = "OtklAVUToggle", x=349, y=19, radius=20, tooltip="Отключение автоматического выключения управления (неисправность реле АВУ)\nTurn off automatic control disable relay (failure of AVU relay)"}, --{ID = "VUD1Toggle", x=393, y=80, radius=20, tooltip="ВУД1: Выключатель управления дверьми\nVUD1: Door control toggle (close doors)"}, --{ID = "DoorSelectToggle",x=321, y=75, radius=20, tooltip="Выбор стороны открытия дверей\nSelect side on which doors will open"}, {ID = "KDLSet", x=97, y=168, radius=20, tooltip="КУ12: Кнопка левых дверей\nKDL: Left doors open"}, {ID = "KRZDSet", x=217, y=168, radius=20, tooltip="КУ10: Кнопка резервного закрытия дверей\nKRZD: Emergency door closing"}, --{ID = "KDPSet", x=349, y=122, radius=20, tooltip="КДП: Кнопка правых дверей\nKDP: Right doors open"}, --{ID = "KVTSet", x=240, y=122, radius=20, tooltip=""}, --{ID = "KSNSet", x=240, y=78, radius=20, tooltip="КСН: Кнопка сигнализации неисправности\nKSN: Failure indication button"}, --{ID = "KRPSet", x=192, y=122, radius=20, tooltip="КРП: Кнопка резервного пуска"}, --{ID = "R_Program1Set", x=112, y=127, radius=20, tooltip="Программа 1\nProgram 1"}, --{ID = "R_Program2Set", x=149, y=127, radius=20, tooltip="Программа 2\nProgram 2"}, --{ID = "R_UNchToggle", x=112, y=30, radius=20, tooltip="УНЧ: Усилитель низких частот\nUNCh: Low frequency amplifier"}, --{ID = "R_ZSToggle", x=149, y=30, radius=20, tooltip="ЭС: Контроль экстренной связи\nES: Emergency communication control"}, --{ID = "R_RadioToggle", x=112, y=80, radius=20, tooltip="Радиоинформатор (встроеный)\nRadioinformator: Announcer (built-in)"}, --{ID = "R_GToggle", x=149, y=80, radius=20, tooltip="Громкоговоритель\nLoudspeaker: Sound in cabin enable"}, } } --VU1 Panel ENT.ButtonMap["VU1"] = { pos = Vector(451.0+9,-17.15,32), ang = Angle(0,270,90), width = 100, height = 240, scale = 0.0625, buttons = { {ID = "VUSToggle", x=0, y=0, w=100, h=110, tooltip="Прожектор\nVUSoggle"}, {x=50,y=170,radius=50,tooltip="Напряжение цепей управления"}, } } --VUSToggle Metrostroi.ClientPropForButton("VUS",{ panel = "VU1", button = "VUSToggle", model = "models/metrostroi_train/switches/autobr.mdl", ang = 270, z=20, }) --VU Panel ENT.ButtonMap["VU"] = { pos = Vector(451.0+8.6,-17.15,17.5), ang = Angle(0,270,90), width = 100, height = 240, scale = 0.0625, buttons = { {ID = "VUToggle", x=0, y=100, w=100, h=140, tooltip="ВУ: Выключатель Управления\nVUToggle"}, {ID = "RezMKToggle", x=30, y=20, w=50, h=100, tooltip="КУ15:Резервное включение мотор-компрессора\nRezMKSet"}, } } ENT.ButtonMap["AVMain"] = { pos = Vector(387.4+14.15,38.8,56), ang = Angle(0,90,90), width = 335, height = 500, scale = 0.0625, buttons = { {ID = "AV8BToggle", x=0, y=0, w=300, h=600, tooltip="АВ-8Б: Автоматическй выключатель (Вспомогательные цепи высокого напряжения)\n"}, } } ---AV1 Panel ENT.ButtonMap["AV1"] = { pos = Vector(387.414+14.15,39,23), ang = Angle(0,90,90), width = 290+0, height = 155, scale = 0.0625, buttons = { {ID = "VU1Toggle", x=0, y=0, w=100, h=140, tooltip="ВУ1: Печь отопления кабины ПТ-6\n"}, {ID = "VU2Toggle", x=100, y=0, w=100, h=140, tooltip="ВУ2: Аварийное освещение 25В\n"}, {ID = "VU3Toggle", x=200, y=0, w=100, h=140, tooltip="ВУ3: Освещение кабины\n"}, } } ENT.ButtonMap["AV2"] = { pos = Vector(401.4,19.15,45.3), ang = Angle(0,90,90), width = 295, height = 155, scale = 0.0625, buttons = { {ID = "RSTToggle", x=0, y=0, w=295, h=155, tooltip="РСТ: Радиооповещение и поездная радио связь\nVB: А62"}, } } --[ARS/Speedometer panel ENT.ButtonMap["ARS"] = { pos = Vector(449.1+12.15,-37.3,4.9), ang = Angle(0,-97.9,69), width = 410*10, height = 95*10, scale = 0.0625/10, buttons = { --{x=2045,y=406,tooltip="Индикатор скорости\nSpeed indicator",radius=130}, --{x=2610,y=363,tooltip="РП: Красная лампа реле перегрузки\nRP: Red overload relay light (power circuits failed to assemble)",radius=120}, --{x=2982,y=363,tooltip="РП: Красная лампа реле перегрузки\nRP: Red overload relay light (power circuits failed to assemble)",radius=120}, --{x=1070+320*0,y=780,tooltip="ЛхРК: Лампа хода реостатного контроллера\nLhRK: Rheostat controller motion light",radius=120}, --{x=1070+320*1,y=780,tooltip="КТ: Контроль тормоза\nKT: ARS braking indicator",radius=120}, --{x=1070+320*2,y=780,tooltip="КВД: Контроль выключения двигателей\nKVD: ARS engine shutdown indicator",radius=120}, --{x=1070+320*3,y=780,tooltip="НР1: Нулевое реле\nNR1: Zero relay state (high voltage enabled)",radius=120}, --{x=1070+320*4,y=780,tooltip="ВПР: Контроль включения поездной радиосвязи\nVPR: Train radio equipment enabled",radius=120}, --{x=1070+320*5,y=780,tooltip="ПЕЧЬ: Индикатор работы печи\nPECH: Cabin heating indicator",radius=120}, --{x=1070+320*6,y=780,tooltip="АВУ: Автоматический выключатель управления\nAVU: Automatic control disabler active",radius=120}, --{x=1070+380*0,y=570,tooltip="ОЧ: Отсутствие частоты АРС\nOCh: No ARS frequency",radius=120}, --{x=1070+380*1,y=570,tooltip="0: Сигнал АРС остановки\n0: ARS stop signal",radius=120}, --{x=1070+380*2,y=570,tooltip="40: Ограничение скорости 40 км/ч\nSpeed limit 40 kph",radius=120}, --{x=1070+380*3,y=570,tooltip="60: Ограничение скорости 60 км/ч\nSpeed limit 60 kph",radius=120}, --{x=1070+380*4,y=570,tooltip="70: Ограничение скорости 70 км/ч\nSpeed limit 70 kph",radius=120}, --{x=1070+380*5,y=570,tooltip="80: Ограничение скорости 80 км/ч\nSpeed limit 80 kph",radius=120}, --{x=1080+380*0,y=363,tooltip="СД: Сигнализация дверей\nSD: Door state light (doors are closed/door circuits are OK)",radius=120}, --{x=1080+380*1,y=363,tooltip="РП: Зелёная лампа реле перегрузки\nRP: Green overload relay light (overload relay open on current train)",radius=120}, } } ENT.ButtonMap["VAH"] = { pos = Vector(400.9,-26.24,38), ang = Angle(0,90,90), width = 150, height = 260, scale = 0.0625, buttons = { {ID = "VAHToggle", x=30,y=0,w=90,h=130 , tooltip="ВАХ: Включение аварийного хода (неисправность реле педали безопасности)\nVAH: Emergency driving mode (failure of RPB relay)"}, {ID = "VADToggle", x=30,y=130,w=90,h=130 , tooltip="ВАД: Включение аварийного закрытия дверей (неисправность реле контроля дверей)\nVAD: Emergency door close override (failure of KD relay)"}, } } -- AV panel ENT.ButtonMap["AV"] = { pos = Vector(394.0+14,-53.5,44.5), ang = Angle(0,90,90), width = 520, height = 550, scale = 0.0625, buttons = { {ID = "ARSToggle", x=152,y=212,w=230,h=140 , tooltip="ARS"}, ---------- {x=33,y=411,tooltip="Регулятор давления АК",radius=70}, {x=90,y=379,tooltip="Соединительные зажимы",w=375,h=230}, {x=390,y=377,tooltip="Кнопка РРП",w=100,h=100}, } } -- Battery panel ENT.ButtonMap["Battery"] = { pos = Vector(387.414+12.15,19.2,28.8), ang = Angle(0,90,90), width = 290+0, height = 155, scale = 0.0625, buttons = { {ID = "VBToggle", x=0, y=0, w=290, h=155, tooltip="АБ: Выключатель аккумуляторной батареи (Вспомогательные цепи низкого напряжения)(\nVB: Battery on/off"}, } } -- Parking brake panel ENT.ButtonMap["ParkingBrake"] = { pos = Vector(454,43.0,2.0), ang = Angle(0,-84,90), width = 400, height = 400, scale = 0.0625, buttons = { {ID = "ParkingBrakeLeft",x=0, y=0, w=200, h=400, tooltip="Поворот колеса ручного тормоза"}, {ID = "ParkingBrakeRight",x=200, y=0, w=200, h=400, tooltip="Поворот колеса ручного тормоза"}, } } -- Train driver helpers panel ENT.ButtonMap["HelperPanel"] = { pos = Vector(446.83,58,25), ang = Angle(0,-25,90), width = 64, height = 144, scale = 0.0625, buttons = { {ID = "VUD2Toggle", x=32, y=42, radius=32, tooltip="ВУД2: Выключатель управления дверьми\nVUD2: Door control toggle (close doors)"}, {ID = "VDLSet", x=32, y=138, radius=32, tooltip="ВДЛ: Выключатель левых дверей\nVDL: Left doors open"}, } } -- Help panel ENT.ButtonMap["Help"] = { pos = Vector(410,-45,62), ang = Angle(0,90,90), width = 28, height = 20, scale = 0.5, buttons = { {ID = "ShowHelp", x=0, y=0, w=28,h=20, tooltip="Помощь в вождении поезда\nShow help on driving the train"}, } } -- Pneumatic instrument panel 2 ENT.ButtonMap["PneumaticManometer"] = { pos = Vector(453.915771,-53.891716,19.525063), ang = Angle(0,-145,90), width = 110, height = 110, scale = 0.0625, buttons = { {x=55,y=55,radius=55,tooltip="Давление в магистралях (красная: тормозной, чёрная: напорной)\nPressure in pneumatic lines (red: brake line, black: train line)"}, } } -- Pneumatic instrument panel ENT.ButtonMap["PneumaticPanels"] = { pos = Vector(455.838104,-51.486084,9.136534), ang = Angle(0,-115,90), width = 60, height = 60, scale = 0.0625, buttons = { {x=30,y=30,radius=30,tooltip="Тормозной манометр: Давление в тормозных цилиндрах (ТЦ)\nBrake cylinder pressure"}, } } ENT.ButtonMap["BLDisconnect"] = { pos = Vector(420+25.15,-56.0-6,-25), ang = Angle(90,180,0), width = 200, height = 90, scale = 0.0625, buttons = { {ID = "DriverValveBLDisconnectToggle", x=0, y=0, w=200, h=90, tooltip="Кран двойной тяги тормозной магистрали\nTrain line disconnect valve"}, } } ENT.ButtonMap["TLDisconnect"] = { pos = Vector(420+25.15*1.1,-56.0+6-6,-25), ang = Angle(90,180,0), width = 200, height = 90, scale = 0.0625, buttons = { --{ID = "EPKToggle", x=0, y=0, w=200, h=90, tooltip="Кран ЭПК\nEPK disconnect valve"} {ID = "DriverValveTLDisconnectToggle", x=0, y=0, w=200, h=90, tooltip="Кран двойной тяги напорной магистрали\nBrake line disconnect valve"}, } } ENT.ButtonMap["EPKDiscoonect"] = { pos = Vector(430.476318,-56.581806,-39.564163), ang = Angle(0,0,0), width = 200, height = 90, scale = 0.0625, buttons = { {ID = "EPKToggle", x=0, y=0, w=200, h=90, tooltip="Кран ЭПК\nEPK disconnect valve"} --{ID = "DriverValveTLDisconnectToggle", x=0, y=0, w=200, h=90, tooltip="Клапан разобщения\nDriver valve disconnect valve"}, } } ENT.ButtonMap["DURA"] = { pos = Vector(408+15+12.15,-58.0-5.3,-6.65), ang = Angle(0,180,0), width = 240, height = 80, scale = 0.0625, buttons = { {ID = "DURASelectMain", x=145, y=43, radius=20, tooltip="DURA Основной путь\nDURA Select Main"}, -- NEEDS TRANSLATING {ID = "DURASelectAlternate", x=180, y=43, radius=20, tooltip="DURA Альтернативный путь\nDURA Select Alternate"}, -- NEEDS TRANSLATING {ID = "DURAToggleChannel", x=100, y=60, radius=20, tooltip="DURA Выбор канала\nDURA Toggle Channel"}, -- NEEDS TRANSLATING {ID = "DURAPowerToggle", x=100, y=30, radius=20, tooltip="DURA Питание\nDURA Power"}, -- NEEDS TRANSLATING } } ENT.ButtonMap["AVU"] = { pos = Vector(453.71597,-19.63482,39.93294), ang = Angle(-8,-90+21.5,90+15), width = 105, height = 85, scale = 0.0625, buttons = { {ID = "AVULight", x=30, y=20, radius=20, tooltip="АВУ: Автоматический выключатель управления\nAVU: Automatic control disabler active"}, {ID = "OtklAVUToggle", x=30, y=60, radius=20, tooltip="Отключение автоматического выключения управления (неисправность АВУ)\nTurn off automatic control disable relay (failure of AVU)"}, } } ENT.ButtonMap["DURADisplay"] = { pos = Vector(408+15-0.75+12.15,-58.0-5.3+1.5625,-6.65), ang = Angle(0,180,0), width = 240, height = 80, scale = 0.0625/3.2, } ENT.ButtonMap["Announcer"] = { pos = Vector(434.3+12.15,-50,40.4), ang = Angle(0,-130,90+50), width = 170, height = 100, scale = 0.0625, buttons = { {ID = "Custom2Set", x=155, y=15, radius=15, tooltip="+"}, {ID = "Custom1Set", x=155, y=42, radius=15, tooltip="-"}, {ID = "Custom3Set", x=85, y=72, radius=20, tooltip="Меню\nMenu"}, {ID = "CustomCToggle", x=20, y=28, radius=20, tooltip="Автоинформатор\nAutoannouncer"}, {ID = "CustomD", x=95+20*-3, y=72, radius=10, tooltip="Информатор: Конечная\nAnnouncer: Last statuon"}, {ID = "CustomE", x=95+20*-2, y=72, radius=10, tooltip="Информатор: Платформа справа\nAnnouncer: Right side"}, {ID = "CustomF", x=95+20*1, y=72, radius=10, tooltip="Информатор: Необходима настройка\nAnnouncer: Need setup"}, {ID = "CustomG", x=95+20*2, y=72, radius=10, tooltip="Информатор: Проигрывание объявления\nAnnouncer: Playing announce"}, } } -- Announcer panel ENT.ButtonMap["AnnouncerDisplay"] = { pos = Vector(434.3+12.15,-50,40.4), ang = Angle(0,-130,90+50), width = 10, height = 10, scale = 0.012, } ENT.ButtonMap["Meters"] = { pos = Vector(453.844452,-56.7,38.7), ang = Angle(0,-148,90), width = 73, height = 140, scale = 0.0625, buttons = { {x=13, y=22, w=60, h=50, tooltip="Вольтметр высокого напряжения (кВ)\nHV voltmeter (kV)"}, {x=13, y=81, w=60, h=50, tooltip="Амперметр (А)\nTotal ampermeter (A)"}, } } ENT.ButtonMap["Speedometer"] = { pos = Vector(453.22702,-53.241482,28), ang = Angle(0,-145,90), width = 110, height = 110, scale = 0.0625, buttons = { {x=0, y=0, w=110, h=110, tooltip="Скоростемер"}, } } --These values should be identical to those drawing the schedule local col1w = 80 -- 1st Column width local col2w = 32 -- The other column widths local rowtall = 30 -- Row height, includes -only- the usable space and not any lines local rowamount = 16 -- How many rows to show (total) --[[ENT.ButtonMap["Schedule"] = { pos = Vector(442.1,-60.7,26), ang = Angle(0,-110,90), width = (col1w + 2 + (1 + col2w) * 3), height = (rowtall+1)*rowamount+1, scale = 0.0625/2, buttons = { {x=1, y=1, w=col1w, h=rowtall, tooltip="М №\nRoute number"}, {x=1, y=rowtall*2+3, w=col1w, h=rowtall, tooltip="П №\nPath number"}, {x=col1w+2, y=1, w=col2w*3+2, h=rowtall, tooltip="ВРЕМЯ ХОДА\nTotal schedule time"}, {x=col1w+2, y=rowtall+2, w=col2w*3+2, h=rowtall, tooltip="ИНТ\nTrain interval"}, {x=col1w+2, y=rowtall*2+3, w=col2w, h=rowtall, tooltip="ЧАС\nHour"}, {x=col1w+col2w+3, y=rowtall*2+3, w=col2w, h=rowtall, tooltip="МИН\nMinute"}, {x=col1w+col2w*2+4, y=rowtall*2+3, w=col2w, h=rowtall, tooltip="СЕК\nSecond"}, {x=col1w+2, y=rowtall*3+4, w=col2w*3+2, h=(rowtall+1)*(rowamount-3)-1, tooltip="Arrival times"}, -- NEEDS TRANSLATING {x=1, y=rowtall*3+4, w=col1w, h=(rowtall+1)*(rowamount-3)-1, tooltip="Station name"}, -- NEEDS TRANSLATING } }]] -- Temporary panels (possibly temporary) ENT.ButtonMap["FrontPneumatic"] = { pos = Vector(466,-45.0,-50.0), ang = Angle(0,90,90), width = 900, height = 100, scale = 0.1, buttons = { {ID = "FrontBrakeLineIsolationToggle",x=189, y=50, radius=32, tooltip="Концевой кран тормозной магистрали"}, {ID = "FrontTrainLineIsolationToggle",x=710, y=50, radius=32, tooltip="Концевой кран напорной магистрали"}, } } ENT.ButtonMap["RearPneumatic"] = { pos = Vector(-466,45.0,-50.0), ang = Angle(0,270,90), width = 900, height = 100, scale = 0.1, buttons = { {ID = "RearTrainLineIsolationToggle",x=189, y=50, radius=32, tooltip="Концевой кран напорной магистрали"}, {ID = "RearBrakeLineIsolationToggle",x=710, y=50, radius=32, tooltip="Концевой кран тормозной магистрали"}, } } ENT.ButtonMap["GV"] = { pos = Vector(160,66,-52), ang = Angle(0,180,90), width = 170, height = 170, scale = 0.1, buttons = { {ID = "GVToggle",x=0, y=0, w= 170,h = 150, tooltip="Главный выключатель", model = { var="GV",sndid = "gv", sndvol = 0.8,sndmin = 80, sndmax = 1e3/3, sndang = Angle(-90,0,0), snd = function(val) return val and "gv_f" or "gv_b" end, }}, } } ENT.ButtonMap["AirDistributor"] = { pos = Vector(-168,68.6,-50), ang = Angle(0,180,90), width = 170, height = 80, scale = 0.1, buttons = { {ID = "AirDistributorDisconnectToggle",x=0, y=0, w= 170,h = 80, tooltip="Выключение воздухораспределителя"}, } } -- UAVA ENT.ButtonMap["UAVAPanel"] = { pos = Vector(450,52,-20), ang = Angle(0,-70,90), width = 230, height = 170, scale = 0.0625, buttons = { {ID = "UAVAToggle",x=230/2, y=0, w=230/2, h=170, tooltip="УАВА: Универсальный Автоматический Выключатель Автостопа\nUAVA: Universal Automatic Autostop Disabler"}, {ID = "UAVAContactSet",x=0, y=0, w=230/2, h=170, tooltip="УАВА: Универсальный Автоматический Выключатель Автостопа (восстановление контактов)\nUAVA: Universal Automatic Autostop Disabler(contacts reset)"}, } } -- Wagon numbers ENT.ButtonMap["TrainNumber1"] = { pos = Vector(-445,-68,-12.5), ang = Angle(0,0,90), width = 130, height = 55, scale = 0.20, } ENT.ButtonMap["TrainNumber2"] = { pos = Vector(396,68,-12.5), ang = Angle(0,180,90), width = 130, height = 55, scale = 0.20, } -- Front info table ENT.ButtonMap["InfoTable"] = { pos = Vector(458.0+12.15,-16.0,12.0), ang = Angle(0,90,90), width = 646, height = 100, scale = 0.1/2, } ENT.ButtonMap["InfoTableSelect"] = { pos = Vector(454.0+12.15,-27.0,27.0), ang = Angle(0,-90,90), width = 250, height = 100, scale = 0.1, buttons = { {ID = "PrevSign",x=0,y=0,w=50,h=100, tooltip="Предыдущая надпись\nPrevious sign"}, {ID = "NextSign",x=50,y=0,w=50,h=100, tooltip="Следующая надпись\nNext sign"}, {ID = "Num2P",x=150,y=0,w=50,h=50, tooltip="Маршрут: Увеличить число 2\nRoute: Increase 2nd number"}, {ID = "Num2M",x=150,y=50,w=50,h=50, tooltip="Маршрут: Уменьшить число 2\nRoute: Decrease 2nd number"}, {ID = "Num1P",x=200,y=0,w=50,h=50, tooltip="Маршрут: Увеличить число 1\nRoute: Increase 1st number"}, {ID = "Num1M",x=200,y=50,w=50,h=50, tooltip="Маршрут: Уменьшить число 1\nRoute: Decrease 1st number"}, } } ENT.ButtonMap["InfoRoute"] = { pos = Vector(451.29+12.15,39.9,24.2), ang = Angle(0,97.3,84), width = 100, height = 100, scale = 0.115, } ENT.ButtonMap["FrontDoor"] = { pos = Vector(455+12.15,16,48.4), ang = Angle(0,-90,90), width = 550, height = 1900, scale = 0.1/2, buttons = { {ID = "FrontDoor",x=0,y=0,w=550,h=1900, tooltip="Передняя дверь\nFront door"}, } } ENT.ButtonMap["CabinDoor"] = { pos = Vector(408.9,64,50.8), ang = Angle(0,0,90), width = 642, height = 1900, scale = 0.1/2, buttons = { {ID = "CabinDoor1",x=0,y=0,w=642,h=1900, tooltip="Дверь в кабину машиниста\nCabin door"}, } } ENT.ButtonMap["PassengerDoor"] = { pos = Vector(390+8,-16,48.4), ang = Angle(0,90,90), width = 642, height = 1900, scale = 0.1/2, buttons = { {ID = "PassengerDoor",x=0,y=0,w=642,h=1900, tooltip="Дверь из салона\nPassenger door"}, } } -------------------------------------------------------------------------------- ENT.ClientPropsInitialized = false ENT.ClientProps["brake334"] = { model = "models/metrostroi_train/81/334cran.mdl", pos = Vector(449.2,-54.2,3.7), ang = Angle(0,47,0) } --[[ENT.ClientProps["brake334_body"] = { model = "models/metrostroi/81-717/brake334_body.mdl", pos = Vector(442+12.15,-56.85,1.0), ang = Angle(0,0,0) }]] ENT.ClientProps["controller"] = { model = "models/metrostroi_train/e/kv.mdl", pos = Vector(452.36,-25.6,2), ang = Angle(0,90+23,0) } ENT.ClientProps["reverser"] = { model = "models/metrostroi/81-717/reverser.mdl", pos = Vector(452.36,-25.6,2), ang = Angle(0,45,90) } ENT.ClientProps["brake_disconnect"] = { model = "models/metrostroi/81-717/uava.mdl", pos = Vector(442.73816,-58.73211,-32.45488), ang = Angle(0,-90,0), } ENT.ClientProps["train_disconnect"] = { model = "models/metrostroi/81-717/uava.mdl", pos = Vector(445.34006,-54.19079,-32.45488), ang = Angle(0,-90,0), color = Color(0,212,255), } ENT.ClientProps["EPK_disconnect"] = { model = "models/metrostroi/81-717/uava.mdl", pos = Vector(434.476318,-58.581806,-39.564163), ang = Angle(0.000000,-90.000000,-90.000000), } ENT.ClientProps["parking_brake"] = { model = "models/metrostroi/81-717/ezh_koleso.mdl", pos = Vector(450.58,31.19,-10.0), ang = Angle(-90,0,0), } -------------------------------------------------------------------------------- ENT.ClientProps["train_line"] = { model = "models/metrostroi_train/e/black_pneumo_needle.mdl", pos = Vector(451.33,-56.03,13.2), ang = Angle(87,-90-54,90) } ENT.ClientProps["brake_line"] = { model = "models/metrostroi_train/e/red_pneumo_needle.mdl", pos = Vector(451.3,-56.00,13.2), ang = Angle(87,-90-54,90) } ENT.ClientProps["brake_cylinder"] = { model = "models/metrostroi_train/e/small_pneumo_needle.mdl", pos = Vector(455.4155,-53.31028,7.21621),--pos = Vector(450.5,-32.9,10.4), ang = Angle(180,-90-24.96,90), scale = 1.5, } -------------------------------------------------------------------------------- ENT.ClientProps["voltmeter"] = { model = "models/metrostroi_train/e/volt_needle.mdl", pos = Vector(451.284607,-57.260746,35.1), ang = Angle(92,33.3,-90) } ENT.ClientProps["ampermeter"] = { model = "models/metrostroi_train/e/volt_needle.mdl", pos = Vector(451.302399,-57.287834,31.31461), ang = Angle(92,33.3,-90) } ENT.ClientProps["volt1"] = { model = "models/metrostroi_train/e/volt_bat_needle.mdl", pos = Vector(458.41455,-20.33349,19.95662), ang = Angle(1,90+2.299,-90) } ENT.ClientProps["speed1"] = {-- --model = "models/metrostroi_train/e/speed_needle.mdl", model = "models/metrostroi_train/e/black_pneumo_needle.mdl", pos = Vector(448.42697,-56.81982,21.85731), ang = Angle(90,-145,90) } --[[ENT.ClientProps["volt2"] = { model = "models/metrostroi/81-717/black_arrow.mdl", pos = Vector(447.6,-35.3,5.0), ang = Angle(90,0,180) }]] -------------------------------------------------------------------------------- --[[ENT.ClientProps["headlights"] = { model = "models/metrostroi/81-717/switch04.mdl", pos = Vector(443.1,-60.0,0.5), ang = Angle(-74,0,0) } ENT.ClientProps["panellights"] = { model = "models/metrostroi/81-717/switch04.mdl", pos = Vector(444.1,-59.3,3.3), ang = Angle(-74,0,0) }]] -------------------------------------------------------------------------------- --[[ {ID = "DIPonSet", x=35 + 50*0, y=95, radius=20, tooltip="Включение ДИП и освещения\nTurn DIP and interior lights on"}, {ID = "DIPoffSet", x=35 + 50*1, y=95, radius=20, tooltip="Выключение ДИП и освещения\nTurn DIP and interior lights off"}, {ID = "VozvratRPSet", x=35 + 50*2, y=95, radius=20, tooltip="Возврат реле перегрузки\nReset overload relay"}, {ID = "KSNSet", x=35 + 50*3, y=95, radius=20, tooltip="КСН: Кнопка сигнализации неисправности\nKSN: Failure indication button"}, {ID = "KDPSet", x=35 + 50*4.95, y=95, radius=20, tooltip="КДП: Кнопка правых дверей\nKDP: Right doors open"}, {ID = "KDLSet", x=95, y=170, radius=20, tooltip="КДЛ: Кнопка левых дверей\nKDL: Left doors open"}, {ID = "KRZDSet", x=217, y=170, radius=20, tooltip="КРЗД: Кнопка резервного закрытия дверей\nKRZD: Emergency door closing"}, {ID = "KU1Toggle", x=17,y=130,w=45,h=90, tooltip="Включение мотор-компрессора\nTurn motor-compressor on"}, {ID = "VUD1Toggle", x=253,y=130,w=45,h=90, radius=20, tooltip="ВУД: Выключатель управления дверьми\nVUD: Door control toggle (close doors)"}, ]] Metrostroi.ClientPropForButton("DIPon",{ panel = "Main", button = "DIPonSet", model = "models/metrostroi_train/e/buttonwhite.mdl", ang = 0, z = -6, }) Metrostroi.ClientPropForButton("VozvratRP",{ panel = "Main", button = "VozvratRPSet", model = "models/metrostroi_train/e/buttonwhite.mdl", ang = 0, z = -6, }) Metrostroi.ClientPropForButton("KVT",{ panel = "Main", button = "KVTSet", model = "models/metrostroi_train/e/buttonwhite.mdl", ang = 0, z = -6, }) Metrostroi.ClientPropForButton("DIPoff",{ panel = "Main", button = "DIPoffSet", model = "models/metrostroi_train/e/buttonred1.mdl", ang = 0, z = 0, }) Metrostroi.ClientPropForButton("KSN",{ panel = "Main", button = "KSNSet", model = "models/metrostroi_train/e/buttonred1.mdl", ang = 0, z = 0, }) Metrostroi.ClientPropForButton("KDP",{ panel = "Main", button = "KDPSet", model = "models/metrostroi_train/e/buttonred1.mdl", ang = 0, z = -0, }) Metrostroi.ClientPropForButton("KDL",{ panel = "Main", button = "KDLSet", model = "models/metrostroi_train/e/buttonred1.mdl", ang = 0, z = 0, }) Metrostroi.ClientPropForButton("KRZD",{ panel = "Main", button = "KRZDSet", model = "models/metrostroi_train/e/buttonwhite.mdl", ang = 0, z = -6, }) Metrostroi.ClientPropForButton("VUD",{ panel = "Main", button = "VUD1Toggle", model = "models/metrostroi_train/switches/vudblack.mdl", z = -20, }) Metrostroi.ClientPropForButton("KU1",{ panel = "Main", button = "KU1Toggle", model = "models/metrostroi_train/switches/vudblack.mdl", z = -20, }) Metrostroi.ClientPropForButton("VAH",{ panel = "VAH", button = "VAHToggle", model = "models/metrostroi_train/switches/autobr.mdl", }) Metrostroi.ClientPropForButton("VAD",{ panel = "VAH", button = "VADToggle", model = "models/metrostroi_train/switches/autobr.mdl", }) --------------------------------------------------------------------------------- Metrostroi.ClientPropForButton("VU1",{ panel = "AV1", button = "VU1Toggle", model = "models/metrostroi_train/switches/autobr.mdl", z=10, }) Metrostroi.ClientPropForButton("VU2",{ panel = "AV1", button = "VU2Toggle", model = "models/metrostroi_train/switches/autobr.mdl", z=10, }) Metrostroi.ClientPropForButton("VU3",{ panel = "AV1", button = "VU3Toggle", model = "models/metrostroi_train/switches/autobr.mdl", z=10, }) Metrostroi.ClientPropForButton("RST",{ panel = "AV2", button = "RSTToggle", model = "models/metrostroi_train/switches/autobr2.mdl", z=20, }) Metrostroi.ClientPropForButton("AV8B",{ panel = "AVMain", button = "AV8BToggle", model = "models/metrostroi_train/switches/automain.mdl", z=31, skin=1, }) Metrostroi.ClientPropForButton("VU",{ panel = "VU", button = "VUToggle", model = "models/metrostroi_train/switches/autobr.mdl", z=0, }) --------------------------------------------------- --RezMKSet Metrostroi.ClientPropForButton("RezMK",{ panel = "VU", button = "RezMKToggle", model = "models/metrostroi_train/switches/vudbrown.mdl", z=15, }) --ALS Metrostroi.ClientPropForButton("ALS",{ panel = "Main", button = "ALSToggle", model = "models/metrostroi_train/81/tumbler1.mdl", ang = 0, }) Metrostroi.ClientPropForButton("LOCh",{ panel = "OldARS", button = "LOCh", model = "models/metrostroi_train/e/ars_04.mdl", z = 0, ang = 0, }) Metrostroi.ClientPropForButton("L0",{ panel = "OldARS", button = "L0", model = "models/metrostroi_train/e/ars_0.mdl", z = 0, ang = 0, }) Metrostroi.ClientPropForButton("L40",{ panel = "OldARS", button = "L40", model = "models/metrostroi_train/e/ars_40.mdl", z = 0, ang = 0, }) Metrostroi.ClientPropForButton("L60",{ panel = "OldARS", button = "L60", model = "models/metrostroi_train/e/ars_60.mdl", z = 0, ang = 0, }) Metrostroi.ClientPropForButton("L80",{ panel = "OldARS", button = "L80", model = "models/metrostroi_train/e/ars_80.mdl", z = 0, ang = 0, }) Metrostroi.ClientPropForButton("L70",{ panel = "OldARS", button = "L70", model = "models/metrostroi_train/e/ars_70.mdl", z = 0, ang = 0, }) --RRP Metrostroi.ClientPropForButton("KRP",{ panel = "Main", button = "KRPSet", model = "models/metrostroi_train/switches/vudblack.mdl", z = -20, }) --ARS Metrostroi.ClientPropForButton("ARS",{ panel = "AV", button = "ARSToggle", model = "models/metrostroi_train/switches/autobr2.mdl", ang = 270, z=-65 }) -- Panel lighning Metrostroi.ClientPropForButton("L_3",{ panel = "Main", button = "L_3Toggle", model = "models/metrostroi_train/81/tumbler1.mdl", ang = 90 }) -- MainPanel Lamps Metrostroi.ClientPropForButton("SD",{ panel = "Main", button = "BlueLight", model = "models/metrostroi_train/e/lampblue.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("gRP",{ panel = "Main", button = "GreenRPLight", model = "models/metrostroi_train/e/lampgreen.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("rRP",{ panel = "Main", button = "RedRPLight", model = "models/metrostroi_train/e/lampred1.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("r2RP",{ panel = "Main", button = "RedRP2Light", model = "models/metrostroi_train/e/lampred1.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("LST",{ panel = "Main", button = "LST", model = "models/metrostroi_train/e/lampwhite1.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("LVD",{ panel = "Main", button = "LVD", model = "models/metrostroi_train/e/lampwhite1.mdl", z = 5.73, ang = 90, }) Metrostroi.ClientPropForButton("AVULight",{ panel = "AVU", button = "AVULight", model = "models/metrostroi_train/81/lamp.mdl", skin = 1, z = -10, }) Metrostroi.ClientPropForButton("AVULight_light",{ panel = "AVU", button = "AVULight", model = "models/metrostroi_train/81/lamp_on.mdl", ignorepanel = true, skin = 1, z = -10, }) Metrostroi.ClientPropForButton("OtklAVU",{ panel = "AVU", button = "OtklAVUToggle", model = "models/metrostroi_train/81/tumbler1.mdl", ang = 90 }) ----------------------------------------------- Metrostroi.ClientPropForButton("SelectMain",{ panel = "DURA", button = "DURASelectMain", model = "models/metrostroi_train/81/button.mdl", skin = 4, z = -1, }) Metrostroi.ClientPropForButton("SelectAlternate",{ panel = "DURA", button = "DURASelectAlternate", model = "models/metrostroi_train/81/button.mdl", skin = 4, z = -1, }) Metrostroi.ClientPropForButton("SelectChannel",{ panel = "DURA", button = "DURAToggleChannel", model = "models/metrostroi_train/81/tumbler2.mdl", }) Metrostroi.ClientPropForButton("DURAPower",{ panel = "DURA", button = "DURAPowerToggle", model = "models/metrostroi_train/81/tumbler2.mdl", }) Metrostroi.ClientPropForButton("VUD2",{ panel = "HelperPanel", button = "VUD2Toggle", model = "models/metrostroi_train/switches/vudwhite.mdl", z = 0, }) Metrostroi.ClientPropForButton("VDL",{ panel = "HelperPanel", button = "VDLSet", model = "models/metrostroi_train/switches/vudwhite.mdl", z = 0, }) Metrostroi.ClientPropForButton("Custom1",{ panel = "Announcer", button = "Custom1Set", model = "models/metrostroi_train/81/button.mdl", skin = 5, z = -1, }) Metrostroi.ClientPropForButton("Custom2",{ panel = "Announcer", button = "Custom2Set", model = "models/metrostroi_train/81/button.mdl", skin = 5, z = -1, }) Metrostroi.ClientPropForButton("Custom3",{ panel = "Announcer", button = "Custom3Set", model = "models/metrostroi/81-717/button07.mdl" }) Metrostroi.ClientPropForButton("CustomC",{ panel = "Announcer", button = "CustomCToggle", model = "models/metrostroi/81-717/switch04.mdl", }) Metrostroi.ClientPropForButton("CustomD",{ panel = "Announcer", button = "CustomD", model = "models/metrostroi/81-717/light01.mdl", }) Metrostroi.ClientPropForButton("CustomE",{ panel = "Announcer", button = "CustomE", model = "models/metrostroi/81-717/light03.mdl", }) Metrostroi.ClientPropForButton("CustomF",{ panel = "Announcer", button = "CustomF", model = "models/metrostroi/81-717/light04.mdl", }) Metrostroi.ClientPropForButton("CustomG",{ panel = "Announcer", button = "CustomG", model = "models/metrostroi/81-717/light02.mdl", }) Metrostroi.ClientPropForButton("Battery",{ panel = "Battery", button = "VBToggle", model = "models/metrostroi_train/switches/autobr3.mdl", z=40, }) -------------------------------------------------------------------------------- ENT.ClientProps["gv"] = { model = "models/metrostroi/81-717/gv.mdl", pos = Vector(154,62.5,-65), ang = Angle(-90,0,-90) } ENT.ClientProps["gv_wrench"] = { model = "models/metrostroi/81-717/reverser.mdl", pos = Vector(154,62.5,-65), ang = Angle(0,0,0) } -------------------------------------------------------------------------------- ENT.ClientProps["book"] = { model = "models/props_lab/binderredlabel.mdl", pos = Vector(404,-32,58.7), ang = Angle(0,0,90) } ENT.ClientProps["E_salon"] = { model = "models/metrostroi_train/e/e_salon.mdl", pos = Vector(0,0,0), ang = Angle(0,0,0) } ENT.ClientProps["Lamps"] = { model = "models/metrostroi_train/e/lamps_on.mdl", pos = Vector(0,0,0), ang = Angle(0,0,0) } ENT.ClientProps["PB"] = {-- model = "models/metrostroi_train/81/pb.mdl", pos = Vector(456.08691, -34.98815, -37.62471), ang = Angle(0,-90,40) } ENT.ClientProps["FrontBrake"] = {-- model = "models/metrostroi_train/81/tmiso.mdl", pos = Vector(455, -26.0, -55), ang = Angle(0,-90,0) } ENT.ClientProps["FrontTrain"] = {-- model = "models/metrostroi_train/81/nmsio.mdl", pos = Vector(455, 26, -55), ang = Angle(0,-90,0) } ENT.ClientProps["RearBrake"] = {-- model = "models/metrostroi_train/81/tmiso.mdl", pos = Vector(-455, -26, -55), ang = Angle(0,90,0) } ENT.ClientProps["RearTrain"] = {-- model = "models/metrostroi_train/81/nmsio.mdl", pos = Vector(-455, 26, -55), ang = Angle(0,90,0) } -------------------------------------------------------------------------------- -- Add doors local function GetDoorPosition(i,k,j) if j == 0 then return Vector(358.27 - 67.49*k - 233.4*i,-64.56*(1-2*k),-1.55) else return Vector(358.27 - 67.49*(1-k) - 233.4*i,-64.56*(1-2*k),-1.55) end end for i=0,3 do for k=0,1 do ENT.ClientProps["door"..i.."x"..k.."a"] = { model = "models/metrostroi_train/e/doorright.mdl", pos = GetDoorPosition(i,k,0), ang = Angle(0,90 + 180*k,0) } ENT.ClientProps["door"..i.."x"..k.."b"] = { model = "models/metrostroi_train/e/doorleft.mdl", pos = GetDoorPosition(i,k,1), ang = Angle(0,90 + 180*k,0) } end end ENT.ClientProps["door1"] = { model = "models/metrostroi_train/e/doorfront.mdl", pos = Vector(464,-17.11,-3.98), ang = Angle(0,-90,0) } ENT.ClientProps["door2"] = { model = "models/metrostroi_train/e/doorback.mdl", pos = Vector(-464,17.11,-3.98), ang = Angle(0,-90,0) } ENT.ClientProps["door3"] = { model = "models/metrostroi_train/e/doorpass.mdl", pos = Vector(396.8,17.11,-6.1), ang = Angle(0,-90,0) } ENT.ClientProps["door4"] = { model = "models/metrostroi_train/e/doorcab.mdl", pos = Vector(442.24,64.56,-2.51), ang = Angle(0,-90,0) } --[[ENT.ClientProps["UAVA"] = { model = "models/metrostroi/81-717/uava_body.mdl", pos = Vector(400,61,-8),--Vector(415.0,-58.5,-18.2), ang = Angle(0,0,0) }]] ENT.ClientProps["UAVALever"] = { model = "models/metrostroi_train/81/uavalever.mdl", pos = Vector(452.84598,51,-21.813349), ang = Angle(0,90,90) } ENT.Texture = "7" ENT.OldTexture = nil --local X = Material( "metrostroi_skins/81-717/6.png") function ENT:UpdateTextures() local texture = Metrostroi.Skins["train"][self:GetNW2String("texture")] local passtexture = Metrostroi.Skins["pass"][self:GetNW2String("passtexture")] local cabintexture = Metrostroi.Skins["cab"][self:GetNW2String("cabtexture")] for _,self in pairs(self.ClientEnts) do if not IsValid(self) then continue end for k,v in pairs(self:GetMaterials()) do local tex = string.Explode("/",v) tex = tex[#tex] if cabintexture and cabintexture.textures[tex] then self:SetSubMaterial(k-1,cabintexture.textures[tex]) end if passtexture and passtexture.textures[tex] then self:SetSubMaterial(k-1,passtexture.textures[tex]) end if texture and texture.textures[tex] then self:SetSubMaterial(k-1,texture.textures[tex]) end end end end -------------------------------------------------------------------------------- function ENT:Think() self.BaseClass.Think(self) if self.Texture ~= self:GetNW2String("texture") then self.Texture = self:GetNW2String("texture") self:UpdateTextures() end if self.PassTexture ~= self:GetNW2String("passtexture") then self.PassTexture = self:GetNW2String("passtexture") self:UpdateTextures() end if self.CabinTexture ~= self:GetNW2String("cabtexture") then self.CabinTexture = self:GetNW2String("cabtexture") self:UpdateTextures() end --print(self.FrontDoor,self:GetPackedBool(114)) --print(self.RearDoor,self:GetPackedBool(156)) --[[ if self.FrontDoor < 90 and self:GetPackedBool(157) or self.FrontDoor > 0 and not self:GetPackedBool(157) then --local FrontDoorData = self.ClientProps["door1"] --FrontDoor:SetLocalPos(FrontDoorData.pos + Vector(-2,-0,0)) self.FrontDoor = math.max(0,math.min(90,self.FrontDoor + (self:GetPackedBool(157) and 1 or -1)*self.DeltaTime*180)) self:ApplyMatrix("door1",Vector(0,-16,0),Angle(0,self.FrontDoor,0)) if not self.ButtonMapMatrix["InfoTable"] then self.ButtonMapMatrix["InfoTable"] = {} self.ButtonMapMatrix["InfoTable"].scale = 0.1/2 end self.ButtonMapMatrix["InfoTable"].ang = Angle(0,90+self.FrontDoor,90) self.ButtonMapMatrix["InfoTable"].pos = Vector(458.0,-16.0,12.0) + Vector(0,1.5,0)*self.FrontDoor/90 end ]] local transient = (self.Transient or 0)*0.05 if (self.Transient or 0) ~= 0.0 then self.Transient = 0.0 end -- Parking brake animation self.ParkingBrakeAngle = self.ParkingBrakeAngle or 0 self.TrueBrakeAngle = self.TrueBrakeAngle or 0 self.TrueBrakeAngle = self.TrueBrakeAngle + (self.ParkingBrakeAngle - self.TrueBrakeAngle)*2.0*(self.DeltaTime or 0) if self.ClientEnts and self.ClientEnts["parking_brake"] then self.ClientEnts["parking_brake"]:SetPoseParameter("position",1.0-((self.TrueBrakeAngle % 360)/360)) end local Lamps = self:GetPackedBool(20) and 0.4 or 1 self:ShowHideSmooth("Lamps",self:Animate("lamps",self:GetPackedBool("Lamps") and Lamps or 0,0,1,6,false)) --ALS Lamps self:ShowHideSmooth("LOCh",self:Animate("light_OCh",self:GetPackedBool(41) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("L0",self:Animate("light_0",self:GetPackedBool(42) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("L40",self:Animate("light_40",self:GetPackedBool(43) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("L60",self:Animate("light_60",self:GetPackedBool(44) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("L70",self:Animate("light_70",self:GetPackedBool(45) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("L80",self:Animate("light_80",self:GetPackedBool(46) and 1 or 0,0,1,10,false)) --MainPanel Lamps self:ShowHideSmooth("SD",self:Animate("light_SD",self:GetPackedBool(40) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("gRP",self:Animate("light_gRP",self:GetPackedBool(36) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("rRP",self:Animate("light_rRP",self:GetPackedBool(35) and 1 or 0,0,1,12,false) + self:Animate("light_rLSN",self:GetPackedBool(131) and 1 or 0,0,0.2,12,false)) self:ShowHideSmooth("r2RP",self:Animate("light_LhRK",self:GetPackedBool(112) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("LST",self:Animate("light_LST",self:GetPackedBool(49) and 1 or 0,0,1,10,false)) self:ShowHideSmooth("LVD",self:Animate("light_LVD",self:GetPackedBool(50) and 1 or 0,0,1,5,false)) -- DIP sound --self:SetSoundState("bpsn2",self:GetPackedBool(52) and 1 or 0,1.0) -- Simulate pressure gauges getting stuck a little self:Animate("brake334", 1-self:GetPackedRatio(0), 0.00, 0.65, 256,24) self:Animate("brake013", self:GetPackedRatio(0)^0.5, 0.00, 0.65, 256,24) self:Animate("controller", self:GetPackedRatio(1), 0, 0.31, 2,false) self:Animate("reverser", self:GetPackedRatio(2), 0.26, 0.35, 4,false) self:Animate("volt1", self:GetPackedRatio(10), 0.347,0.524) self:ShowHide("reverser", self:GetPackedBool(0)) self:ShowHide("brake013", self:GetPackedBool(22)) self:ShowHide("brake334", not self:GetPackedBool(22)) self:ShowHide("brake334_body", not self:GetPackedBool(22)) self:Animate("brake_line", self:GetPackedRatio(4), 0.626, 0.88, 256,2)--,,0.01) self:Animate("train_line", self:GetPackedRatio(5)-transient, 0.626, 0.88, 256,2)--,,0.01) self:Animate("brake_cylinder", self:GetPackedRatio(6), 0.121, 0.865, 256,2)--,,0.03) self:Animate("voltmeter", self:GetPackedRatio(7), 0.587, 0.874) self:Animate("ampermeter", self:GetPackedRatio(8), 0.628, 0.875) --self:Animate("volt2", 0, 0.38, 0.63) local wheel_radius = 0.5*44.1 -- units local speed = self:GetPackedRatio(3)*100 local ang_vel = speed/(2*math.pi*wheel_radius) -- Rotate wheel self.Angle = ((self.Angle or math.random()) + ang_vel*self.DeltaTime) % 1.0 self:Animate("speed1", self:GetPackedRatio("Speed") + math.sin(math.pi*8*self.Angle)*2/120, 0.525, 0.695, nil, nil, 256,2,0.01) self:Animate("headlights", self:GetPackedBool(1) and 1 or 0, 0,1, 8, false) self:Animate("VozvratRP", self:GetPackedBool(2) and 1 or 0, 0,1, 16, false) self:Animate("DIPon", self:GetPackedBool(3) and 1 or 0, 0,1, 16, false) self:Animate("DIPoff", self:GetPackedBool(4) and 1 or 0, 0,1, 16, false) self:Animate("Battery", self:GetPackedBool(7) and 1 or 0, 1,0, 4, false) --self:Animate("bat2", self:GetPackedBool(7) and 1 or 0, 0,1, 16, false) --self:Animate("bat3", self:GetPackedBool(7) and 1 or 0, 0,1, 16, false) self:Animate("RezMK", self:GetPackedBool(8) and 1 or 0, 0,1.1, 16, false) self:Animate("VUS", self:GetPackedBool(1) and 1 or 0, 1,0.1, 16, false) self:Animate("KU1", self:GetPackedBool(9) and 1 or 0, 0,1, 16, false) self:Animate("VAH", self:GetPackedBool(10) and 1 or 0, 1,0, 4, false) self:Animate("VAD", self:GetPackedBool(11) and 1 or 0, 1,0, 4, false) self:Animate("VUD", self:GetPackedBool(12) and 1 or 0, 0,1, 16, false) self:Animate("VUD2", self:GetPackedBool(13) and 1 or 0, 0,1, 16, false) self:Animate("VDL", self:GetPackedBool(14) and 1 or 0, 0,1, 16, false) self:Animate("KDL", self:GetPackedBool(15) and 1 or 0, 0,1, 16, false) self:Animate("KDP", self:GetPackedBool(16) and 1 or 0, 0,1, 16, false) self:Animate("KRZD", self:GetPackedBool(17) and 1 or 0, 0,1, 16, false) self:Animate("KSN", self:GetPackedBool(18) and 1 or 0, 0,1, 16, false) self:Animate("OtklAVU", self:GetPackedBool(19) and 0 or 1, 0,1, 16, false) self:Animate("DURAPower", self:GetPackedBool(24) and 1 or 0, 0,1, 16, false) self:Animate("SelectMain", self:GetPackedBool(29) and 1 or 0, 0,1, 16, false) self:Animate("SelectAlternate", self:GetPackedBool(30) and 1 or 0, 0,1, 16, false) self:Animate("SelectChannel", self:GetPackedBool(31) and 1 or 0, 0,1, 16, false) self:Animate("ARS", self:GetPackedBool(56) and 1 or 0, 1,0, 4, false) self:Animate("ALS", self:GetPackedBool(57) and 1 or 0, 0,1, 16, false) self:Animate("KVT", self:GetPackedBool(28) and 1 or 0, 0,1, 16, false) ---- self:Animate("door1", self:GetPackedBool(157) and (self.Door1 or 0.99) or 0,0,0.54/2, 1024, 1) self:Animate("door3", self:GetPackedBool(158) and (self.Door2 or 0.99) or 0,0,0.51/2, 1024, 1) self:Animate("door2", self:GetPackedBool(156) and (self.Door3 or 0.99) or 0,0,0.54/2, 1024, 1) self:Animate("door4", self:GetPackedBool(159) and (self.Door2 or 0.99) or 0,0,0.51/2, 1024, 1) self:Animate("FrontBrake", self:GetNW2Bool("FbI") and 0 or 1,0,0.35, 3, false) self:Animate("FrontTrain", self:GetNW2Bool("FtI") and 0 or 1,0,0.35, 3, false) self:Animate("RearBrake", self:GetNW2Bool("RbI") and 1 or 0,0,0.35, 3, false) self:Animate("RearTrain", self:GetNW2Bool("RtI") and 1 or 0,0,0.35, 3, false) self:Animate("VUD2", self:GetPackedBool(13) and 1 or 0, 0,1, 16, false) self:Animate("L_3", self:GetPackedBool(62) and 1 or 0, 0,1, 16, false) self:Animate("Custom1", self:GetPackedBool(114) and 1 or 0, 0,1, 16, false) self:Animate("Custom2", self:GetPackedBool(115) and 1 or 0, 0,1, 16, false) self:Animate("Custom3", self:GetPackedBool(116) and 1 or 0, 0,1, 16, false) --[[self:Animate("Custom4", self:GetPackedBool(117) and 1 or 0, 0,1, 16, false) self:Animate("Custom5", self:GetPackedBool(118) and 1 or 0, 0,1, 16, false) self:Animate("Custom6", self:GetPackedBool(119) and 1 or 0, 0,1, 16, false) self:Animate("Custom7", self:GetPackedBool(120) and 1 or 0, 0,1, 16, false) self:Animate("Custom8", self:GetPackedBool(121) and 1 or 0, 0,1, 16, false) self:Animate("CustomA", self:GetPackedBool(122) and 1 or 0, 0,1, 16, false) self:Animate("CustomB", self:GetPackedBool(123) and 1 or 0, 0,1, 16, false)]]-- self:Animate("CustomC", self:GetPackedBool(124) and 1 or 0, 0,1, 16, false) self:Animate("R_G", self:GetPackedBool(125) and 1 or 0, 0,1, 16, false) self:Animate("R_Radio", self:GetPackedBool(126) and 1 or 0, 0,1, 16, false) self:Animate("R_UNch", self:GetPackedBool(127) and 1 or 0, 0,1, 16, false) self:Animate("Program1", self:GetPackedBool(128) and 1 or 0, 0,1, 16, false) self:Animate("Program2", self:GetPackedBool(129) and 1 or 0, 0,1, 16, false) self:Animate("rc1", self:GetPackedBool(130) and 0.87 or 1, 0,1, 1, false) self:Animate("UOS", self:GetPackedBool(134) and 0.87 or 1, 0,1, 1, false) self:Animate("BPS", self:GetPackedBool(135) and 0.87 or 1, 0,1, 1, false) self:Animate("UAVALever", self:GetPackedBool(152) and 1 or 0, 0,0.25, 128, 3,false) self:Animate("brake_disconnect",self:GetPackedBool("DriverValveBLDisconnect") and 1 or 0,0,0.5, 3,false) self:Animate("train_disconnect",self:GetPackedBool("DriverValveTLDisconnect") and 1 or 0,0,0.5, 3,false) self:Animate("EPK_disconnect",self:GetPackedBool("EPK") and 1 or 0,0,0.5, 3,false) self:Animate("PB", self:GetPackedBool(165) and 1 or 0,0,0.2, 8,false) self:ShowHideSmooth("AVULight_light",self:Animate("AVUl",self:GetPackedBool(38) and 1 or 0,0,1,10,false)) -- Animate AV switches for i,v in ipairs(self.Panel.AVMap) do local value = self:GetPackedBool(64+(i-1)) and 1 or 0 --self:Animate("a"..(i-1),value,0,1,8,false) end self:Animate("VU1",self:GetPackedBool(64+19) and 1 or 0, 1,0, 4, false) self:Animate("VU",self:GetPackedBool(64+12) and 1 or 0, 1,0, 4, false) self:Animate("RST",self:GetPackedBool(64+24) and 1 or 0, 1,0, 4, false) self:Animate("AV8B",self:GetPackedBool(64+7) and 1 or 0, 0,1, 8, false) self:Animate("VU2",self:GetPackedBool(64+36) and 1 or 0, 1,0, 4, false) self:Animate("VU3",self:GetPackedBool(64+13) and 1 or 0, 1,0, 4, false) -- Main switch if self.LastValue ~= self:GetPackedBool(5) then self.ResetTime = CurTime()+1.5 self.LastValue = self:GetPackedBool(5) end self:Animate("gv_wrench", (self:GetPackedBool(5) and 1 or 0), 0,0.51, 128, 1,false) self:ShowHide("gv_wrench", CurTime() < self.ResetTime) -- Animate doors for i=0,4 do for k=0,1 do local n_l = "door"..i.."x"..k.."a" local n_r = "door"..i.."x"..k.."b" self:Animate(n_l,self:GetPackedBool(21+(1-k)*4) and 1 or 0,0.11,0.93, 0.8 + (-0.2+0.4*math.random()),0) self:Animate(n_r,self:GetPackedBool(21+(1-k)*4) and 1 or 0,0.11,0.93, 0.8 + (-0.2+0.4*math.random()),0) --[[ local animation = self:Animate(n_l,self:GetPackedBool(21+(1-k)*4) and 1 or 0,0,1, 0.8 + (-0.2+0.4*math.random()),0) local offset_l = Vector(math.abs(31*animation),0,0) local offset_r = Vector(math.abs(32*animation),0,0) if self.ClientEnts[n_l] then --self.ClientEnts[n_l]:SetPos(self:LocalToWorld(self.ClientProps[n_l].pos + (1.0 - 2.0*k)*offset_l)) --self.ClientEnts[n_l]:SetSkin(self:GetSkin()) end if self.ClientEnts[n_r] then --self.ClientEnts[n_r]:SetPos(self:LocalToWorld(self.ClientProps[n_r].pos - (1.0 - 2.0*k)*offset_r)) --self.ClientEnts[n_r]:SetSkin(self:GetSkin()) end]] end end --if self.ClientEnts["door1"] then self.ClientEnts["door1"]:SetSkin(self:GetSkin()) end --if self.ClientEnts["door2"] then self.ClientEnts["door2"]:SetSkin(self:GetSkin()) end --if self.ClientEnts["door3"] then self.ClientEnts["door3"]:SetSkin(self:GetSkin()) end --if self.ClientEnts["door4"] then self.ClientEnts["door4"]:SetSkin(self:GetSkin()) end -- Brake-related sounds local brakeLinedPdT = self:GetPackedRatio(9) local dT = self.DeltaTime self.BrakeLineRamp1 = self.BrakeLineRamp1 or 0 if (brakeLinedPdT > -0.001) then self.BrakeLineRamp1 = self.BrakeLineRamp1 + 4.0*(0-self.BrakeLineRamp1)*dT else self.BrakeLineRamp1 = self.BrakeLineRamp1 + 4.0*((-0.6*brakeLinedPdT)-self.BrakeLineRamp1)*dT end self.BrakeLineRamp1 = math.Clamp(self.BrakeLineRamp1,0,1) self:SetSoundState("release2",self.BrakeLineRamp1^1.65,1.0) self.BrakeLineRamp2 = self.BrakeLineRamp2 or 0 if (brakeLinedPdT < 0.001) then self.BrakeLineRamp2 = self.BrakeLineRamp2 + 4.0*(0-self.BrakeLineRamp2)*dT else self.BrakeLineRamp2 = self.BrakeLineRamp2 + 8.0*(0.1*brakeLinedPdT-self.BrakeLineRamp2)*dT end self.BrakeLineRamp2 = math.Clamp(self.BrakeLineRamp2,0,1) self:SetSoundState("release3",self.BrakeLineRamp2 + math.max(0,self.BrakeLineRamp1/2-0.15),1.0) self:SetSoundState("cran1",math.min(1,self:GetPackedRatio(4)/50*(self:GetPackedBool(6) and 1 or 0)),1.0) -- Compressor local state = self:GetPackedBool(20) self.PreviousCompressorState = self.PreviousCompressorState or false if self.PreviousCompressorState ~= state then self.PreviousCompressorState = state if state then self:SetSoundState("compressor_e",1,1) else self:SetSoundState("compressor_e",0,1) self:SetSoundState("compressor_e_end",0,1) self:SetSoundState("compressor_e_end",1,1) --self:PlayOnce("compressor_e_end",nil,1,nil,true) end end -- ARS/ringer alert local state = self:GetPackedBool(39) self.PreviousAlertState = self.PreviousAlertState or false if self.PreviousAlertState ~= state then self.PreviousAlertState = state if state then self:SetSoundState("ring4",1,1) else self:SetSoundState("ring4",0,0) self:SetSoundState("ring4_end",0,1) self:SetSoundState("ring4_end",1,1) end end local state = self:GetPackedBool("VPR") self.PreviousVPRState = self.PreviousVPRState or false if self.PreviousVPRState ~= state then self.PreviousVPRState = state if state then self:SetSoundState("vpr",1,1) else self:SetSoundState("vpr",0,0) self:PlayOnce("vpr_end","cabin",1) end end -- RK rotation if self:GetPackedBool(112) then self.RKTimer = CurTime() end local state = (CurTime() - (self.RKTimer or 0)) < 0.2 self.PreviousRKState = self.PreviousRKState or false if self.PreviousRKState ~= state then self.PreviousRKState = state if state then self:SetSoundState("rk_spin",0.7,1,nil,0.75) else self:SetSoundState("rk_spin",0,0,nil,0.75) self:SetSoundState("rk_stop",0,1,nil,0.75) self:SetSoundState("rk_stop",0.7,1,nil,0.75) end end --DIP sound --self:SetSoundState("bpsn2",self:GetPackedBool(32) and 1 or 0,1.0) end function ENT:Draw() self.BaseClass.Draw(self) end function ENT:DrawPost() local dc = render.GetLightColor(self:LocalToWorld(Vector(460.0,0.0,5.0))) self:DrawOnPanel("InfoTable",function() surface.SetDrawColor(0,0,0) --255*dc.x,250*dc.y,220*dc.z) surface.DrawRect(50,0,540,100) draw.Text({ text = self:GetNW2String("FrontText",""), font = "MetrostroiSubway_InfoPanel",--..self:GetNW2Int("Style",1), pos = { 320, 50 }, xalign = TEXT_ALIGN_CENTER, yalign = TEXT_ALIGN_CENTER, color = Color(250,200,20,255)}) end) if self.InfoTableTimeout and (CurTime() < self.InfoTableTimeout) then self:DrawOnPanel("InfoTableSelect",function() draw.Text({ text = self:GetNW2String("RouteNumber",""), font = "MetrostroiSubway_InfoPanel",--..self:GetNW2Int("Style",1), pos = { 140, -50 }, xalign = TEXT_ALIGN_CENTER, yalign = TEXT_ALIGN_CENTER, color = Color(255,0,0,255)}) draw.Text({ text = self:GetNW2String("FrontText",""), font = "MetrostroiSubway_InfoPanel",--..self:GetNW2Int("Style",1), pos = { 140, -100 }, xalign = TEXT_ALIGN_CENTER, yalign = TEXT_ALIGN_CENTER, color = Color(255,0,0,255)}) end) end self:DrawOnPanel("InfoRoute",function() surface.SetDrawColor(142,132,101) --255*dc.x,250*dc.y,220*dc.z) --surface.DrawRect(0,100,88,70) draw.Text({ text = self:GetNW2String("RouteNumber"," ")[1], font = "MetrostroiSubway_InfoRoute",--..self:GetNW2Int("Style",1), pos = { 20, 135 }, xalign = TEXT_ALIGN_CENTER, yalign = TEXT_ALIGN_CENTER, color = Color(0,0,0,255)}) draw.Text({ text = self:GetNW2String("RouteNumber"," ")[2], font = "MetrostroiSubway_InfoRoute",--..self:GetNW2Int("Style",1), pos = { 68, 135 }, xalign = TEXT_ALIGN_CENTER, yalign = TEXT_ALIGN_CENTER, color = Color(0,0,0,255)}) end) self:DrawOnPanel("ARS",function() if not self:GetPackedBool(32) then return end local speed = self:GetPackedRatio(3)*100.0 local d1 = math.floor(speed) % 10 local d2 = math.floor(speed / 10) % 10 self:DrawDigit((196+0) *10, 35*10, d2, 0.75, 0.55) self:DrawDigit((196+10)*10, 35*10, d1, 0.75, 0.55) --[[local b = self:Animate("light_rRP",self:GetPackedBool(35) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(253*10,33*10,16*10,8*10) surface.SetAlphaMultiplier(1) draw.DrawText("РП","MetrostroiSubway_LargeText",253*10+30,33*10-19,Color(0,0,0,255)) end local b = self:Animate("light_rLSN",self:GetPackedBool(131) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(290*10,33*10,16*10,8*10) draw.DrawText("РП","MetrostroiSubway_LargeText",290*10+30,33*10-19,Color(0,0,0,255)) end]] --[[b = self:Animate("light_gRP",self:GetPackedBool(36) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(140*10,33*10,16*10,8*10) draw.DrawText("РП","MetrostroiSubway_LargeText",140*10+30,33*10-19,Color(0,0,0,255)) end]] --[[b = self:Animate("light_gKT",self:GetPackedBool(47) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(133*10,73*10,16*10,8*10) draw.DrawText("КТ","MetrostroiSubway_LargeText",133*10+30,73*10-20,Color(0,0,0,255)) end ]] --[[b = self:Animate("light_gKVD",self:GetPackedBool(48) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(165*10,73*10,16*10,8*10) draw.DrawText("КВД","MetrostroiSubway_LargeText",165*10,73*10-20,Color(0,0,0,255)) end]] --[[b = self:Animate("light_LhRK",self:GetPackedBool(33) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(101*10,73*10,16*10,8*10) end]] --[[b = self:Animate("light_NR1",self:GetPackedBool(34) and 0 or 1,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(196*10,73*10,16*10,8*10) draw.DrawText("НР1","MetrostroiSubway_LargeText",196*10,73*10-20,Color(0,0,0,255)) end]] --[[b = self:Animate("light_PECH",self:GetPackedBool(37) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(260*10,73*10,16*10,8*10) draw.DrawText("ПЕЧЬ","MetrostroiSubway_SmallText",260*10,73*10-5,Color(0,0,0,255)) end]] --[[ b = self:Animate("light_AVU",self:GetPackedBool(38) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(295*10,73*10,16*10,8*10) draw.DrawText("АВУ","MetrostroiSubway_LargeText",295*10,73*10-20,Color(0,0,0,255)) end ]] --[[b = self:Animate("light_SD",self:GetPackedBool(40) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(102*10,33*10,16*10,8*10) draw.DrawText("СД","MetrostroiSubway_LargeText",102*10+30,33*10-20,Color(0,0,0,255)) end]] ------------------------------------------------------------------------ --[[b = self:Animate("light_OCh",self:GetPackedBool(41) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(102*10,53*10,16*10,8*10) draw.DrawText("ОЧ","MetrostroiSubway_LargeText",102*10+30,53*10-15,Color(0,0,0,255)) end]] --[[b = self:Animate("light_0",self:GetPackedBool(42) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(140*10,53*10,16*10,8*10) draw.DrawText("0","MetrostroiSubway_LargeText",140*10+55,53*10-10,Color(0,0,0,255)) end]] --[[b = self:Animate("light_40",self:GetPackedBool(43) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(255,50,0) surface.DrawRect(176*10,53*10,16*10,8*10) draw.DrawText("40","MetrostroiSubway_LargeText",176*10+30,53*10-10,Color(0,0,0,255)) end]] --[[b = self:Animate("light_60",self:GetPackedBool(44) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(217*10,53*10,16*10,8*10) draw.DrawText("60","MetrostroiSubway_LargeText",217*10+30,53*10-10,Color(0,0,0,255)) end]] --[[b = self:Animate("light_75",self:GetPackedBool(45) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(255*10,53*10,16*10,8*10) draw.DrawText("70","MetrostroiSubway_LargeText",255*10+30,53*10-10,Color(0,0,0,255)) end]] --[[b = self:Animate("light_80",self:GetPackedBool(46) and 1 or 0,0,1,5,false) if b > 0.0 then surface.SetAlphaMultiplier(b) surface.SetDrawColor(50,255,50) surface.DrawRect(294*10,53*10,16*10,8*10) draw.DrawText("80","MetrostroiSubway_LargeText",294*10+30,53*10-10,Color(0,0,0,255)) end]] surface.SetAlphaMultiplier(1.0) end) --[[ self:DrawOnPanel("IGLA",function() local plus = ((not self:GetPackedBool(32) or not self:GetPackedBool(78)) and 1 or 0) surface.SetDrawColor(50 - plus*40,255 - plus*220,40 - plus*40) surface.DrawRect(0,-4,360,60) if not self:GetPackedBool(32) or not self:GetPackedBool(78) then return end local text1 = "" local text2 = "" local C1 = Color(0,0,0,255) local C2 = Color(50,200,50,255) local flash = false local T = self:GetPackedRatio(11) local Ptrain = self:GetPackedRatio(5)*16.0 local Pcyl = self:GetPackedRatio(6)*6.0 local date = os.date("!*t",os_time) -- Default IGLA text text1 = "IGLA-01K RK TEMP" text2 = Format("%02d:%02d:%02d %3d C",date.hour,date.min,date.sec,T) -- Modifiers and conditions if self:GetPackedBool(25) then text1 = " !! Right Doors !!" end if self:GetPackedBool(21) then text1 = " !! Left Doors !!" end if T > 300 then text1 = "Temperature warning!" end if self:GetPackedBool(50) and (Pcyl > 1.1) then text1 = "FAIL PNEUMATIC BRAKE" flash = true end if self:GetPackedBool(35) and self:GetPackedBool(28) then text1 = "FAIL AVU/BRAKE PRESS" flash = true end if self:GetPackedBool(35) and (not self:GetPackedBool(40)) then text1 = "FAIL SD/DOORS OPEN " flash = true end if self:GetPackedBool(36) then text1 = "FAIL OVERLOAD RELAY " flash = true end if Ptrain < 5.5 then text1 = "FAIL TRAIN LINE LEAK" flash = true end if T > 400 then flash = true end if T > 500 then text1 = "!Disengage circuits!" end if T > 750 then text1 = " !! PIZDA POEZDU !! " end -- Draw text if flash and ((RealTime() % 1.0) > 0.5) then C2,C1 = C1,C2 end for i=1,20 do surface.SetDrawColor(C2) surface.DrawRect(3+(i-1)*17.7+1,0+4,16,22) draw.DrawText(string.upper(text1[i] or ""),"MetrostroiSubway_IGLA",3+(i-1)*17.7,0+0,C1) end for i=1,20 do surface.SetDrawColor(C2) surface.DrawRect(3+(i-1)*17.7+1,0+24+4,16,22) draw.DrawText(string.upper(text2[i] or ""),"MetrostroiSubway_IGLA",3+(i-1)*17.7,0+24,C1) end end) ]] self:DrawOnPanel("AnnouncerDisplay",function() local plus = (not self:GetPackedBool(32) and 1 or 0) surface.SetDrawColor(50 - plus*40,255 - plus*220,40 - plus*40) surface.DrawRect(260,80,390,150) if not self:GetPackedBool(32) then return end -- Custom announcer display local C1 = Color(0,0,0,210) local C2 = Color(50,200,50,255) local flash = false text1 = self:GetNW2String("CustomStr0") text2 = self:GetNW2String("CustomStr1") -- Draw text if flash and ((RealTime() % 1.0) > 0.5) then C2,C1 = C1,C2 end for i=1,20 do surface.SetDrawColor(C2) surface.DrawRect(280+(i-1)*17.7+1,124+4,16,20) draw.DrawText(string.upper(text1[i] or ""),"MetrostroiSubway_IGLA",280+(i-1)*17.7,124+0,C1) end for i=1,20 do surface.SetDrawColor(C2) surface.DrawRect(280+(i-1)*17.7+1,124+31+4,16,20) draw.DrawText(string.upper(text2[i] or ""),"MetrostroiSubway_IGLA",280+(i-1)*17.7,124+31,C1) end end) --[[ self:DrawOnPanel("DURADisplay",function() if not self:GetPackedBool(32) or not self:GetPackedBool(24) then return end local function GetColor(id, text) if text then return self:GetPackedBool(id) and Color(255,0,0) or Color(0,0,0) else return not self:GetPackedBool(id) and Color(255,255,255) or Color(0,0,0) end end surface.SetAlphaMultiplier(0.4) surface.SetDrawColor(255,255,255) surface.DrawRect(0,3+22.8*0,211,22.8) -- 120 surface.SetAlphaMultiplier(1.0) draw.DrawText("DURA V 1.0","MetrostroiSubway_IGLA",0,0+22.8*0, Color(0,0,0,255)) surface.SetAlphaMultiplier(0.4) surface.SetDrawColor(GetColor(31)) surface.SetAlphaMultiplier(0.4) surface.DrawRect(0,3+22.8*1,211,23) -- 120 surface.SetAlphaMultiplier(1.0) draw.DrawText("Channel:" .. (self:GetPackedBool(31) and "2" or "1"),"MetrostroiSubway_IGLA",0,0+22.8*1,GetColor(31, true)) surface.SetAlphaMultiplier(0.4) surface.SetDrawColor(GetColor(153)) surface.SetAlphaMultiplier(0.4) surface.DrawRect(0,3+22.8*2,211,23) -- 120 surface.SetAlphaMultiplier(1.0) draw.DrawText("Channel1:" .. (self:GetPackedBool(153) and "Alt" or "Main"),"MetrostroiSubway_IGLA",0,0+22.8*2,GetColor(153, true)) surface.SetAlphaMultiplier(0.4) surface.SetDrawColor(GetColor(154)) surface.DrawRect(0,3+22.8*3,211,23) -- 120 surface.SetAlphaMultiplier(1.0) draw.DrawText("Channel2:" .. (self:GetPackedBool(154) and "Alt" or "Main"),"MetrostroiSubway_IGLA",0,0+22.8*3,GetColor(154, true)) surface.SetAlphaMultiplier(0.4) surface.SetDrawColor(255,255,255) surface.DrawRect(0,3+22.8*4,211,23) -- 120 surface.SetAlphaMultiplier(1) end)]] self:DrawOnPanel("FrontPneumatic",function() draw.DrawText(self:GetNW2Bool("FbI") and "Isolated" or "Open","Trebuchet24",150,0,Color(0,0,0,255)) draw.DrawText(self:GetNW2Bool("FtI") and "Isolated" or "Open","Trebuchet24",670,0,Color(0,0,0,255)) end) self:DrawOnPanel("RearPneumatic",function() draw.DrawText(self:GetNW2Bool("RbI") and "Isolated" or "Open","Trebuchet24",150,0,Color(0,0,0,255)) draw.DrawText(self:GetNW2Bool("RtI") and "Isolated" or "Open","Trebuchet24",670,0,Color(0,0,0,255)) end) self:DrawOnPanel("AirDistributor",function() draw.DrawText(self:GetNW2Bool("AD") and "Air Distributor ON" or "Air Distributor OFF","Trebuchet24",0,0,Color(0,0,0,255)) end) -- Draw train numbers local dc = render.GetLightColor(self:GetPos()) self:DrawOnPanel("TrainNumber1",function() draw.DrawText(Format("%04d",self:EntIndex()),"MetrostroiSubway_LargeText3",0,0,Color(255*dc.x,255*dc.y,255*dc.z,255)) end) self:DrawOnPanel("TrainNumber2",function() draw.DrawText(Format("%04d",self:EntIndex()),"MetrostroiSubway_LargeText3",0,0,Color(255*dc.x,255*dc.y,255*dc.z,255)) end) end function ENT:OnButtonPressed(button) if button == "ShowHelp" then RunConsoleCommand("metrostroi_train_manual") end local bp_press = self:GetPackedRatio(6) local blocked_l = self:GetPackedBool(132) and 0 or 1 local blocked_r = self:GetPackedBool(133) and 0 or 1 if button == "ParkingBrakeLeft" then self.ParkingBrakeAngle = (self.ParkingBrakeAngle or 0) - blocked_l*45 end if button == "ParkingBrakeRight" then self.ParkingBrakeAngle = (self.ParkingBrakeAngle or 0) + blocked_r*45 end if button == "ShowHelp" then RunConsoleCommand("metrostroi_train_manual") end if button == "PrevSign" then self.InfoTableTimeout = CurTime() + 2.0 end if button == "NextSign" then self.InfoTableTimeout = CurTime() + 2.0 end if button and button:sub(1,3) == "Num" then self.InfoTableTimeout = CurTime() + 2.0 end end